LARGE DIGITAL TEMPERATURE AND HUMIDITY DISPLAYS
DUAL CIRCUIT INPUT, 4~20mA or 0-10Vdc or Remote sensor Inputs

Alarms and Retransmission Output options, Analogue, Voltage or Serial
These displays combine Temperature and Humidity on two separate displays ( in a single case ) with an integral 4~20mA dual input sensor or a dual 0-10Vdc input signal.
The 4~20mA sensor protrudes into the AIR from the bottom of the case ( sensor shown below ).

LARGE DIGITAL LED TEMPERATURE AND HUMIDITY DISPLAYS
FEATURES AND OPTIONS
- Digit heights, 2.3”, 4.0”, 6.0”, 8.0”, 12.0”, 14.0”, 16.0”, 18.0”
- Scale ranges
- TEMPERATURE 0~99 °C / 32~210 °F, 0~99.9 °C / 32~212 °F
- HUMIDITY 0~99 % or ( RH Legend )
- Indoor or Outdoor
- Wall or Suspension mounting
- 95~265Vac, 24Vdc or 12Vdc power input options
- Input options 4~20mA or 0-10Vdc
- Red or Green LED options ( consult sales office )
- Alarm or Retransmission Output options
LED DISPLAY VIEWING DISTANCES
The viewing distances shown below are true to the LED manufacturers specifications and will give CLEAR UNAMBIGUOUS READING – They are NOT to be taken as Maximum distances.
We have given a fair distance chart below for consideration.
2.3” (58mm) Clear viewing up to 15 meters / 50 feet
4.0” (102mm) Clear viewing up to 35 meters / 115 feet
6.0” (160mm) Clear viewing up to 55 meters / 180 feet
8.0” (203mm) Clear viewing up to 75 meters / 246 feet
12.0” (305mm) Clear viewing up to 115 meters / 377 feet
14.0” (355mm) Clear viewing up to 135 meters / 442 feet
16.0” (405mm) Clear viewing up to 155 meters / 508 feet
18.0” (457mm) Clear viewing up to 170 meters / 557 feet
MOUNTING OPTIONS of LARGE DIGITAL DISPLAYS
LED DISPLAY WALL MOUNTING
Wall mounting cases up to 6” high digits are supplied with side brackets that can rotate in their mounting to enable the display to be ‘ TILTED ‘. 8” high digit displays and above are normally supplied with four welded corner brackets for direct fixing to a wall. The reason for the difference is purely weight. If an 8” high digits displays only has 2 or 3 digits and single line, it too can have side adjusting brackets. 12” and above are always with fixed.

LED DISPLAY SUSPENSION MOUNTING
This method of mounting is popular for Double Sided or Multiline displays which have to be seen by a section of workers. Several suspension mounting displays can be installed in a work area. Dimensions are not given here as they vary according to Digit Height, Number of Digits and Number of Lines as well as whether the Large Display is Single or Double sided.

Suspension Picture Example Only
How Can We Help?
One of our strengths is being able to design bespoke Large Digital LED Displays around our standard software and mechanical designs, to meet your exact requirements.
TECHNICAL SUPPORT ADVICE
One display or many displays, our experienced technical staff will discuss and assist you in achieving exactly what you require, we will guide you on what is the easiest, least expensive and easy to operate solution.
We have a very experienced team of software and mechanical engineers, who get involved from any project from the beginning.
CONTACT US
Please call our Sales Office or email your outline specification and we will acknowledge your request the same day. Let us then discuss with you the finer details. We are also able to visit you with demonstration units if required.
IMPORTANT NOTICE
This site is currently undergoing a update with New and EXISTING PRODUCTS and will be re-launched in due course.
For further information on any of these products please email to our USA OFFICE, in Cincinnati, Ohio.
Email: info@largedigitdisplays.com or dave@largedigitdisplays.com
Tel : 513 560 5262