Eagle Controls USA plus Mexico, Caribbean, South America
LARGE DIGITAL LED COUNTERS & RATE DISPLAYS
Our Large Digital LED Counters and Rate Displays will accept standard input signals, contact closure, 24Vdc, NPN, PNP, Quadrature and are available from 2 to 12 digits in heights from 2.3”-18”. UP or DOWN, BATCH or TOTALISING count, single line or multiline, IP55 or IP65 ( NEMA 13 or NEMA 4 ).

WIDE VARIETY OF INDUSTRIAL INPUT SIGNALS
Contact Closure, 24Vdc, NPN,
PNP, Quadrature
INDOOR or OUTDOOR USE
Count Range from 2 digits to 12 Digits
High Brightness LEDs
LARGE DIGITAL LED COUNTERS & RATE DISPLAYS
GENERAL OVERVIEW – LED DIGITAL COUNTERS
These robust Digital LED Counters and Rate Displays are available with as few as 2 digits to as many as 12 LED digits in single line or multi line format.
They will accept all INDUSTRY STANDARD INPUTS
Contact Closure
24Vdc from a PLC
NPN
PNP
Quadrature
They are suitable for INDOOR or OUTDOOR applications with the appropriate IP and NEMA rating cases.
MAX COUNT SPEED
- 3KHz
UP or DOWN COUNTING ( Single Line )
UP COUNTING
The Large Digit LED COUNTERS are also called TOTALISERS, where from an input signal they will count UP either to the maximum range of the counter, or they can be programmed to STOP at a predetermined value and provide an output via a Relay, for example, to start another related operation. The Large LED Counter can continue to count up after that event or it can be RESET.
DOWN COUNTING
This type of Large Digit LED COUNTER is also called a BATCH COUNTER, whereby a preset value is entered and then the counter is activated by input signal to count down from this value to ZERO or another preset value.
UP or DOWN COUNTING ( Dual Line or Multiline ) LED DISPLAYS
Like the SINGLE line UP or DOWN Counters, a typical dual line counter provides two visual lines of information at all times –
TARGET X X X X
ACTUAL X X X X
Here a TARGET ( Goal ) figure is entered ( for what is wanted ) and the ACTUAL figure is what is actually happening.
Sometimes a THIRD LINE is required to show TIME taken to achieve the TARGET.
There are many options open to individual application needs.
UP / DOWN COUNTING ( ADD & SUBTRACT ) LED DISPLAYS
Standard feature on all Counters
INPUTS / MULTI CHANNEL LED DISPLAYS
Standard 1 input but up 5 Input channels may be ordered
RATE LED DIGITAL DISPLAYS ( Speed )
Used extensively to display LINE SPEED in engineering units per Hour, Minute or Seconds via typically PNP inputs, or any other device where SPEED is a concern. The maximum RATE / COUNT SPEED is 3KHz.
Refresh option is available and the refresh time should be stated when ordering
Example : The display will count input pulses for a minute and display that figure for a minute and then refresh the display after a minute to display the last minute run. These figures can be varied.
Most applications would only require 4 or 5 digits and a decimal point is available.

FASCIA LEGENDS / SYMBOLS
Any Legend can be factory fitted to depict your COUNT or RATE engineering unit.
NO EXTRA CHARGE IS MADE FOR THIS
Please advise what Legend you require at the time of ordering
MOUNTING OPTIONS of LARGE DIGIT COUNTERS & RATE DISPLAYS
PANEL MOUNT CASE
Limited to the 2.3” (58mm) and 4.0” (102mm) high digits, these panel mount displays can be used Indoors or Outdoors. This applies up to 6 digits for the 2.3” and 4.0”.
CASE H ( height ) and L ( length )
3 Digit LED Display Panel Cut Out
2.3″ – H103 x L191mm + 53mm for legend
4.0″ – H158 x L311mm + 92mm for legend
4 Digit LED Display Panel Cut Out
2.3″ – H103 x L244mm + 53mm for legend
4.0″ – H158 x L403mm + 92mm for legend
5 Digit LED Display Panel Cut Out
2.3″ – H103 x L297mm + 53mm for legend
4.0″ – H158 x L495mm + 92mm for legend
6 Digit LED Display Panel Cut Out
2.3″ – H103 x L350mm + 53mm for legend
4.0″ – H158 x L587mm + 92mm for legend
Add 10 mm to H x L for facias for all
SUSPENSION MOUNT
(Chains for Ceiling or Gantry not supplied)
Popular for DOUBLE SIDED DISPLAYS.

WALL MOUNTING
Wall mounting cases are supplied with adjustable side brackets with a ‘ TILT ‘ facility
OVERALL CASE DIMENSIONS in millimeters ( without brackets ) FOR 2.3”, 4.0”, 6.0”. Please consult sales office for larger height digits.
CASE H ( height ) and L ( length )
2.3” ( 58mm ) digit height
2 Digit H100 x L151 x D61
3 Digit H100 x L198 x D61
4 Digit H100 x L251 x D61
5 Digit H100 x L304 x D61
6 Digit H100 x L357 x D61
8 Digit H100 x L463 x D61
4.0” ( 102mm ) digit height
2 Digit H155 x L226 x D61
3 Digit H155 x L318 x D61
4 Digit H155 x L410 x D61
5 Digit H155 x L502 x D61
6 Digit H155 x L594 x D61
8 Digit H155 x L778 x D61
6.0” ( 160mm ) digit height
2 Digit H240 x L350 x D95
3 Digit H240 x L460 x D95
4 Digit H240 x L650 x D95
5 Digit H240 x L800 x D95
LARGE DIGIT HEIGHT OPTIONS
Height LED Digit options 2.3” (58mm) 4” (102mm) 6” (152mm) 8” (203mm) 12” (305mm) 14” (355mm) 16” (405mm) 18” (457mm)
LED DISPLAY VIEWING DISTANCES
The viewing distances shown below are true to the LED manufacturers specifications and will give CLEAR UNAMBIGUOUS READING – They are NOT to be taken as Maximum distances.
Eye sight differs from person to person, we have given a fair distance for consideration.
DIGIT HEIGHTS | VIEWING DISTANCES |
---|---|
Actual | Guide Only |
2.3” (58mm) | 15 meters / 50 feet |
4” (102mm) | 35 meters / 115 feet |
6” (150mm) | 55 meters / 180 feet |
8” (203mm) | 75 meters / 246 feet |
12” (305mm) | 115 meters / 377 feet |
14″ (355mm) | 135 meters /442 feet |
16” (400mm) | 155 meters / 508 feet |
18″ (457 mm) | 170 metres / 557 feet |
IP / NEMA ( USA ) ENVIRONMENT PROTECTION RATINGS
All our displays are IP54 / NEMA 13 and IP65 / NEMA 4 rated.
DAYLIGHT VIEWING LED – HIGH BRIGHTNESS
Hi brightness LEDS are used for all OUTDOOR applications but in situations of murky INDOOR atmospheres/environments these can also be fitted to ensure visibility at all times.
POWER SUPPLY OPTIONS
95~265Vac
24Vdc
12Vdc
GENERAL SPECIFICATIONS of LARGE DIGITAL LED COUNTERS & RATE DISPLAYS
LED COLORS AVAILABLE
- 2.3” (58mm)
or
- 4.0” (102mm)
or
- 4.0” (102mm)
/
Color change at presets
LAST DIGIT ROUND UP ( RATE DISPLAYS ONLY )
Programmable 5, 10
DECIMAL POINT POSITIONING ( RATE DISPLAYS ONLY )
1, 2, 3, 4 places depending on scale range
ENVIRONMENTAL OPERATING CONDITIONS
-10 ~ 45 °C / 14 ~ 113 °F
Specification Sheets
Our specification sheets provide you with all the information contained on this web page in a PDF printable form.
To download a specification sheet complete the CONTACT FORM below and if you tick the box requesting a specification sheet then you will be directed to the downloads page.
How Can We Help?
Whatever your Large Digit LED Display requirements are we are sure we can help. Contact Us Now for further information.
To help us provide a realistic quotation we will need as much of the following information as possible.
DIGIT HEIGHT 2.3”, 4.0”, 6.0”
FUNCTION Counter UP, Counter DOWN, Rate
INPUT TYPE Contact Closure, NPN, PNP, 24V Plc or Quadrature
DECIMAL POINT RATE DISPLAYS ONLY
NUMBER OF DIGITS 2 to 12
NUMBER OF LINES Single Line or Multi Line
MOUNTING TYPE Wall, Panel or Suspension
INSTALLATION Indoor or Outdoor
POWER INPUT 95~265Vac, 24Vdc or 12Vdc
Contact Form – Counters and Rate Displays
"*" indicates required fields